Farmbitz - the only international distributor of Pat's Easy Change

Ball Ends, Bushes, Knuckles & Pins

Ball Ends, Bushes, Knuckles & Pins

Bushes & pins for a variety of 3 point applications



  Top Link Forged Hook End RH Cat. 2

Top Link Forged Hook End RH Cat. 2

Top Link Forged Hook End Hook Cat 2 Hook length 11inch (280mm) Thread RH 1.1/4inch (31.75mm) UNC Thread length 6.3/4inch (171mm) Hook diameter 1.31/32inch (50mm) NOTE: this hook does NOT take a standard cat 2 (2" / 51mm) ball use 1.13/16inch (46mm) b..

AUD149.60 Ex Tax: AUD136.00

  Top Link Forged Hook End RH Cat. 2 Std

Top Link Forged Hook End RH Cat. 2 Std

Top Link Forged Hook End Hook Cat 2 Hook length 11inch (280mm) Thread RH 1.1/8inch (28.6mm) UNC Thread length 6.1/2inch (165mm) Hook diameter 1.31/32inch (50mm) NOTE: this hook takes a standard cat 2 (2" / 51mm) ball https://farmbitz.com/farmbitz-tra..

AUD160.00 Ex Tax: AUD145.45

Ball  for Lower Link  - Cat 1 to Cat 2

Ball for Lower Link - Cat 1 to Cat 2

;Galvanised Ball for quick hitch 3 point linkage lower linkBush from Cat 1 pin to Cat 2 hookInner 7/8 inch, outer 2 inch, length 11/2 inchInner 22.4mm, outer 51mm, length 38 mm..

AUD15.30 Ex Tax: AUD13.91

Ball End Cat 2 Weld On with Bend

Ball End Cat 2 Weld On with Bend

Lower Link Weld On Ball End Cat 2 with bend. I/D: 11/8 inch 29mm Width: 13/4inch 45mm Working Length: 4 inch 102mm Weld on Length: 113/16inch 46mm..

AUD36.00 Ex Tax: AUD32.73

Ball End Top Link Screw on - Cat 2

Ball End Top Link Screw on - Cat 2

Replacement Toplink ball end  Cat 2 Available for RH or LH thread Various Thread sizes 1 1/16", 1 1/8", 1 1/4", 1 3/8", M20, M36 Various Lengths 8 9/16", 9 3/4", 10", 10 1/2", 10 1/4", 10 5/8", 11 5/8", 12 1/4", 13 1/4" 140mm..

AUD0.00 Ex Tax: AUD0.00

Ball End Top Link Weld On - Cat 2

Ball End Top Link Weld On - Cat 2

Top Link Weld On Ball End Cat 2 I/D: 1 inch 25mm Width: 2 inch 51mm Working Length: 2 7/8 inch. 73mm Weld on Length: 2" 51mm..

AUD24.50 Ex Tax: AUD22.27

Ball End Weld On for Top Link - Cat 1

Ball End Weld On for Top Link - Cat 1

Top Link Weld On Ball End Cat 1  I/D: 3/4 inch 19mm Width: 1 3/4 inch 44mm Working Length: 2 5/32 inch. 55mm Weld on Length: 1" 25mm..

AUD22.50 Ex Tax: AUD20.45

Ball End Weld On Lower Link - Cat 2

Ball End Weld On Lower Link - Cat 2

Lower Link Weld On Ball End Cat 2 I/D: 11/8 inch 29mm Width: 23/4 inch 80mm Working Length: 31/8 inch 80mm Weld on Length: 23/4inch 70mm..

AUD24.50 Ex Tax: AUD22.27

Ball for Lower Link - Cat 2 implement to Cat 3 hook

Ball for Lower Link - Cat 2 implement to Cat 3 hook

Galvanised Ball for quick hitch 3 point linkage lower linkBush from Cat 2 pin to Cat 3 hookInner 11/8 inch, outer  217/32 inch, width 15/8 inchInner 28.6mm, outer 64mm, width 42mmIncludes guide cone & linch pin..

AUD33.25 Ex Tax: AUD30.23

Showing 1 to 9 of 41 (5 Pages)