Pat's Short Receiver Kit - when the bend on your lift arms is less than 30mm from the ball. Some tractors that may exhibit this are the Fiat and one model of Kubota.

SUPPLIED FROM AUSTRALIAN STOCK

Kit has 2 Low Profile/Short Hook Hitches - for Implements with less than 90 mm pin clearance. The kit includes all the pins, bolts, brackets & shims to install, FREE Stabiliser bar & 6 genius Lynch Pin Washers that protect the pins from bending or being lost.

Short receivers have the lift pin relocated approximately 10mm to mount on lift arms that have the bend close to the ball.

The Complete Cat 1 Package!

Convert your Tractor to a Quick Hitch system in Minutes.

Pick up and drop implements in the time it takes to attach your PTO shaft & Top Link.

Easy to install with just a flat spanner and a hammer,
no welding required. No need to modify any implements.

Quick & Inexpensive.

Works with almost any tractor Cat 1 & Cat 1 implement - flexible width and height unlike more expensive frame-based systems.

For explanation of Categories or Cat 1 see below or image on this page.

Easily moved to another tractor.

This model has a modified mounting for lift arms with restricted clearance behind the ball ends, especially with lift arms that have sharp bends near the ball ends, including MF TE20 and some Fiat tractors.

This patented system is made in the USA from American hot-rolled steel.

Note: this extends the length of the lift arms by 100mm.
Work Safely!
Consider the PTO Extension Adaptor if your PTO shaft overlap length may be compromised. PTO Extension Adaptor available from FarmBitz here
Ensure you order the correct size!
Measure the Lift arm ball & implement pins.
Cat 1 is 7/8" or 22.4mm diameter.

Manufacturer's warranty on Hitches

Also available in standard Cat 1 and Cat 2 Easy Install.
Weld-on models also available.